IJ Start Canon Setup | IJ.Start.Cannon | Canon.com/ijsetup

Process: canon.com/ijsetup

This blog describes how to set up a Canon printer, both wired and wireless, on Windows and Mac computers. It is necessary to install the most recent drivers in order to set up the printer. To find the most recent Canon IJ Setup drivers, you'll also need to know the model number.


It would be advantageous if you had a router or modem at home to make this connection, and the contact points should also function properly. Making this Canon ijsetup on a PC or Smartphone might be easier if you had a piece of equipment with an internet connection.

Guidance for setting up Canon.com/IJ setup

There are a few things you should know before you begin setting up your Canon printer.

Keep the model number of your printer handy before starting the setup procedure.
Make sure your device has enough storage space to install the driver.
Check that the printer is properly connected to the power outlet.
Make sure your computer is connected to the internet.

The procedure for setting up the printer is described in this page. As stated below, follow the directions to the letter. Contact our support team for a Canon Printer Offline Mac system solution.

Setup Canon Printer On Windows (Wireless) – Canon IJ Setup Guide

1. To begin, go to 'Canon.com/ijsetup' and download the printer driver software.
2. Switch on your Canon printer and double-check that the power switch is plugged in properly.
3. Then, open the downloaded driver setup file and continue until you reach the page where you may choose "Wireless Setup."
4. After selecting the wifi option, go to your Canon printer's interface and press the WiFi setup button.
5. After you've made your device settings, click OK.
6. After that, go to Device Settings>LAN Settings and click the 'OK' button.
7. Select LAN Settings>Wireless Lan Setup and click 'OK.' Your printer will now look for an access point to connect to.
8. Make sure your WiFi router is turned on. On the printer, the WiFi flashlight will now blink.
9. A network list appears next on the screen. Choose your Wi-Fi network from the list and click 'OK.'
10. Demonstrate your WPA/WEP key (WiFi password). Click "OK" after entering the right password.
11. In a matter of seconds, your printer will join to the WiFi network.
12. As a result, following the preceding instructions, you can easily complete the wireless ij.start.cannon for your Windows system.